Laser Engraving · Coatesville, Chester County, PA
Laser engraving service for glass, metal, wood and more
Print Habit engraves and marks glass, metal, wood, acrylic, slate, leather and more in Coatesville, PA, and ships across the US. We run UV, fiber and CO₂ lasers and choose one for each job by the material, the detail, depth, contrast and color the mark needs, the size of the piece and the time it takes.
- 3 laser types
- CO₂, fiber and UV
- Low
- minimums
- Free
- local delivery over $200
Need branded pens? See our custom pens

One shop, three laser types
The right laser for the job
Many engraving shops own one kind of laser and make every job fit it. We have three laser types, so we choose the one that suits your material instead.
Glass shows the difference best. A UV laser leaves a smooth, bright etch on glass that can rival sandblasting. A CO₂ laser can mark glass too, but it works by fracturing the surface, so the mark comes out rough and chipped. Glass goes on our UV laser first.
Owning three laser types is only half of it. Knowing which one to use, at what settings, for this material from this maker, is what gets you a clean result the first time. We've been laser engraving since 2019, and we test before we engrave.
Your item, or one of ours
- Tumblers, bottles, pens, keychains and knives
- Wood, leather, glass, acrylic and coated metal
- Names, logos, serial numbers and QR codes
- Your own item: send a spare so we can test first
By the numbers
Why engraved drinkware earns its keep
- 3,162
- impressions over a promo drinkware item's lifetime
- 63%
- of people keep and use promo drinkware for a year or longer
- 30%
- are more likely to do business with the company that gave it
- ⅓¢
- cost per impression for a $10 insulated travel mug
Source: ASI 2023 Ad Impressions Study
Which laser we use for each material
| Material | Lasers we use | What decides |
|---|---|---|
| Glass and mirror | UV | UV first: a smooth, bright etch that can rival sandblasting |
| Acrylic | UV to engraveCO₂ to cut | UV's small spot holds very fine detail, down to micro text you'd need a magnifying glass to read |
| Stainless steel, aluminum, brass | UVorFiber for a deep engrave | The detail, depth, contrast and color required, and the time it takes to achieve the mark |
| Coated and painted metal (tumblers, pens) | UVFiberCO₂ | CO₂ removes the coating without touching the metal. Fiber removes it and can engrave the metal too. UV can do both in finer detail, but deep marks take it many passes. |
| Wood | UVorCO₂ | The detail, depth, contrast and color required, and the time it takes to achieve the mark |
| Leather and leatherette | UVorCO₂ | The detail, depth, contrast and color required, and the time it takes to achieve the mark |
| Fabric | UV | Fine detail with very little heat |
| Slate | CO₂orFiber for fine detail | A bright, high-contrast mark |
Most materials can go on more than one of our lasers. The final call depends on the job: the material, the detail, depth, contrast and color required, the size of the piece and the time it takes to achieve the mark. For example, a UV laser can leave a clean white mark on some materials where fiber or CO₂ can't, or would take much longer to dial in.
CO₂ vs fiber vs UV laser: what's the difference?
The three laser types differ in wavelength, and that decides what each does best. A UV laser, often called a cold laser, works by photochemical ablation instead of heat and has the smallest spot, so it marks glass, acrylic, wood, leather and many metals in fine detail. A fiber laser engraves metal deep. A CO₂ laser has a wider beam for cutting sheet materials, slate and larger pieces.
| Laser | Wavelength | Typical spot size | How it marks |
|---|---|---|---|
| UV | 355 nm | 0.01–0.02 mm | Photochemical ablation (cold processing): it breaks the material's bonds instead of melting, burning or annealing it; the finest detail |
| Fiber | 1,064 nm | 0.03–0.05 mm | Concentrated power for metal; deep engraving |
| CO₂ | 10,600 nm | 0.10–0.20 mm | Heat; a wide beam for cutting and larger pieces |
Typical values for each laser type, not measurements of our machines. The dots show the relative spot size.
What is laser engraving?
Laser engraving uses a focused beam of light to remove or change a thin layer of a material's surface, leaving a permanent design with no ink. The laser follows your digital artwork, so names, logos, serial numbers and QR codes come out sharp and repeatable on glass, metal, wood and more.
Laser engraving vs etching vs marking: what's the difference?
All three use a laser, but they change the surface in different ways. Engraving removes material, so the design sits below the surface. Etching changes only the very top layer, which gives glass its frosted look. Marking changes the surface color without removing material, one common way to put serial numbers on steel.
What we engrave, by material
We engrave and mark almost any solid material, from industrial metal parts to fabric. These are the materials we work with most.
Glass etching and engraving
We etch glassware on our UV laser for a smooth, bright finish: stemless and 20 oz wine glasses, 16 oz pint glasses, beer mugs, wine bottles and decanters. We also cut glass to size, engrave it, and keep the glass in stock, and we etch and reverse-paint mirrors.
Metal engraving
Stainless steel, aluminum and brass take a crisp, permanent mark on our UV laser, and go on our fiber laser when the design needs a deep engrave. We engrave tumblers and water bottles on a rotary attachment so the design wraps evenly, plus pens, chef and pocket knives, bottle openers and lighters. On coated tumblers and pens, a CO₂ laser removes the coating without touching the metal. A fiber laser removes it and can engrave the metal too. A UV laser can do both in finer detail, but a deep mark takes it many passes. We make metal cards, from aluminum business cards to stainless steel cards, including crypto receive cards: metal cards styled and sized like a credit card, with your name, the coin's logo and your wallet's public key, never a private key or seed phrase. For industry, we mark metal parts with serial numbers, part numbers and product marks.
See custom tumblersWood and leather engraving
We engrave wood plaques, signs and cutting boards in maple, bamboo and walnut, and mark real and vegan leather and leatherette for hat patches, journals and gifts. Recent jobs include laser-engraved leather patches on trucker hats and leatherette journals personalized with each name. Wood and leather go on our UV or CO₂ laser, depending on the detail, depth, contrast and color required and the time it takes to achieve the mark.
Acrylic engraving
We cut acrylic sheets on the CO₂ laser and engrave them on the UV laser, because the UV laser's much smaller spot holds far finer detail. That includes engraved acrylic signs and edge-lit LED signs on a base. To order acrylic engraving online, open our Print & Cut app, choose Laser engrave and see the price before you order.
Engrave acrylic onlineSlate engraving
We engrave slate coasters. Slate usually goes on the CO₂ laser for a bright, high-contrast mark, or on the fiber laser when the design has very fine detail.
Engraving items you bring us
We engrave many items customers supply, from tumblers, knives and tools to glassware and gifts. Before we engrave yours, we test.
Why we test first
Even the same material engraves differently from one manufacturer or batch to the next, so the right settings for one tumbler can be wrong for another. A quick test dials them in for your item. Without one, a mistake is likely.
How we test
Send one or two extra pieces of the same item. Small items need more: a pen has little room for a test, so send two or three. A larger piece goes further: on a spare coaster we can run a full material test on one side and fine-tune the settings on the other. Or let us make a small test mark somewhere hidden, like the bottom. There's no testing fee; we just need the spare pieces.
What we turn down
If we can't test, we usually can't take the job. That rules out most one-of-a-kind, expensive or heirloom pieces, because a test mark on them isn't an option.
At your own risk
We take care with every piece, but we can't control how a material we didn't supply will react, so items you bring us, including the test pieces, are engraved at your own risk. We can't replace or reimburse a supplied item.
Real orders, real names
Laser engraving we've done for customers
What we engrave
Custom engraved gifts, awards and branded gear
If it's wood, leather, glass, acrylic or metal, there's a good chance we can engrave it. Here's what customers order most.
Engraved tumblers & water bottles
Logos and names engraved all the way around stainless drinkware on our rotary attachment.
Pens & name badges
Clean, permanent branding for the office, the front desk and every trade show table.
Awards & medals
End-of-season medals, plaques and recognition pieces, personalized one by one.
Wood plaques & cutting boards
Maple, bamboo and walnut with deep, rich engraving for gifts and signs.
Leather patches
Real and vegan leather patches engraved with your logo, ready for hats and bags.
Engraved keychains & dog tags
Small, tough pieces with names, logos or contact details that won't rub off.
Pocket knives & lighters
Branded gear for crews and clients, and personal gifts with a name or date.
Acrylic signs & desk gifts
Engraved acrylic for signs, desktop pieces and awards that look sharp under light.
Made here
Engraved on our own lasers in Coatesville
Every order runs on our equipment, not a supplier's, so we see your item before and after it's engraved. Round items like tumblers, bottles and awards go on a rotary attachment so the engraving wraps evenly. Our large-format gantry laser handles full 4×8 ft sheets, and its front and back open so longer material can pass through. Every piece is inspected before it leaves the shop.
- Rotary for curved items
- Customer-supplied items
- Mockup before you order
- Inspected before it ships
How it works
Ordering custom engraving
Order online (acrylic today)
Order acrylic engraving online
- Upload, choose Laser engrave, see the price Open our Print & Cut app, upload your artwork, choose Laser engrave, and see the price before you order. The preview shows exactly what we'll engrave and cut. We're adding more materials to the app.
Request a quote (everything else)
How to order laser engraving
- 1 · Choose your item Pick from glassware, tumblers, pens, coasters, acrylic signs and more, or bring us an item you already own.
- 2 · Send your artwork Vector files (AI, EPS, PDF, SVG) give the cleanest result; a 300 dpi PNG works too.
- 3 · See a mockup and approve your quote You'll see a mockup of your design on your item before you approve the quote.
- 4 · We engrave it Your item goes on the laser that suits its material, and every piece is inspected before it leaves.
Delivery
Pickup, delivery or shipping
- Free local pickup Collect your order from our Coatesville workshop.
- Shipped nationwide Not local? We ship anywhere in the United States, with tracking on every order.
Who we engrave for
From one-off gifts to a full product line
Schools & teams
End-of-year awards, medals and custom team merch.
Gift givers
Birthdays, weddings and anniversaries, with gift boxes and bags available.
Trades & contractors
Branded knives, tape measures and tools that stay on the job site.
Small businesses
Engraved promotional products and employee recognition.
Retailers & resellers
Wholesale custom goods, with white-label shipping straight to your customer.
Industrial laser marking
Serial numbers, asset tags, barcodes and QR codes marked permanently on metal.
Couldn't be more pleased with the customer service and gear we got from Print Habit! The Print Habit staff were wonderful to work with and offered some great ideas! The shirts and hats are excellent quality and the prints are very high quality. Thank you! We'll be back to get more!
Not sure we can engrave it?
Tell us what the item is made of, how many you need and when you need them. Send a photo, or bring it by the shop. We'll tell you which laser suits it and send you a quote.
Related projects
More engraving we've made for customers
Engraving is often one piece of a bigger order. Here's what we've made alongside it.

Case study
Laser-engraved soccer medals
Medals and presentation tins engraved with each player's name for a youth team.

Case study
Leather patch hats for TCAC
Trucker hats with laser-engraved leather patches, plus shirts and hoodies.

Case study
Signs, polos & pens for El Rancho
Signs, staff polos and laser-engraved pens for a Honey Brook restaurant.

Service
Custom pens with your logo
Soft-touch stylus pens, laser engraved or printed in full color.
FAQ
Laser engraving: frequently asked questions
What can you laser engrave?
Glass, mirrors, stainless steel, aluminum, brass, coated metal, wood, acrylic, slate, fabric, and real and vegan leather. Popular items are glassware, tumblers and water bottles, pens, coasters, knives, lighters, bottle openers, metal cards, medals and leather hat patches. If you're not sure about your material, call us.
What's the difference between CO₂, fiber and UV laser engraving?
A UV laser has the finest spot and barely heats the material, so it is our first choice for glass and acrylic and marks wood, leather and many metals well. A fiber laser engraves metal deep. A CO₂ laser cuts sheet materials and engraves slate and larger pieces. We have all three laser types, so each job goes on the one that suits it.
How does a UV laser engrave without heat?
A UV laser's short wavelength (about 355 nm) carries more energy per photon than CO₂ or fiber light. That energy breaks the surface material's chemical bonds directly instead of heating it, so there's almost no heat-affected zone and far less risk of melting, warping, cracking or charring. Thin glass with flaws can still crack, which is one more reason we test first.
Can you laser engrave glass?
Yes. Glass goes on our UV laser first, because it leaves a smooth, bright etch that can rival sandblasting. A CO₂ laser can mark glass too, but it fractures the surface, so the mark comes out rough and chipped. We engrave wine and pint glasses, beer mugs, wine bottles, decanters and mirrors, and we cut flat glass to size and engrave it.
Is laser glass etching the same as sandblasting?
No. Sandblasting and etching cream frost glass through a stencil. We etch glass on a UV laser, which follows your digital artwork directly, and the finish can rival sandblasting.
Can you engrave stainless steel?
Yes. Stainless steel takes a permanent, high-contrast mark on our UV laser, and goes on our fiber laser when it needs a deep engrave. It suits logos, names, serial numbers and QR codes on tumblers, cards, knives and tools.
Can I bring my own item to be engraved?
Yes, for many items, as long as we can test first. Even the same material engraves differently from one maker to the next, so we need one or two extra pieces (two or three for small items like pens) or a small test mark in a hidden spot, like the bottom. We usually turn down one-of-a-kind or heirloom pieces, because we can't test them.
What if my item is damaged during engraving?
Items you bring us, including test pieces, are engraved at your own risk, because we can't control how a material we didn't supply will react. That's why we test first and usually turn down one-of-a-kind pieces. We can't replace or reimburse a supplied item.
Do you send a proof?
Only if we change your artwork. You'll see a mockup of your design on your item before you approve the quote. If your artwork needs cleaning up or adjusting, we include that in your quote, and you'll receive a proof to approve before we engrave. Otherwise, we engrave the file you send.
How much does laser engraving cost?
Laser engraving is quoted per job, because the price depends on the item, the size and detail of the engraving, and how many you need. We keep minimums low for small personalized orders and bulk runs alike. Send us your artwork, the item and the quantity, and we'll send you a quote.
What file should I send for engraving?
Vector files (SVG, PDF, AI or EPS) give the cleanest result, but a high-resolution (300 dpi) PNG works too.
Does laser engraving wear off?
No. Laser engraving is permanent. The laser marks the material itself rather than printing ink on top of it, so there is nothing to peel, rub off or fade. That makes it durable and scratch-resistant on metal, wood, glass and leather, and well suited to awards, tools and everyday items that get handled a lot.
How long does an engraving order take?
Standard engraving orders are ready within 6 business days. Ask about faster turnaround when you request your quote.
Do you offer gift packaging?
Yes. You can add gift boxes or bags to your order, so engraved gifts arrive ready to give. For resellers, and for anyone sending a gift straight to someone else, we also offer white-label shipping directly to the recipient, with no Print Habit branding on the package.
Do you deliver locally?
Yes. Pick up free at our Coatesville workshop, or we'll deliver to Coatesville, Downingtown, Exton and Parkesburg, with free local delivery on orders over $200. We ship everywhere else in the US with tracking. For large or delicate orders, we offer white-glove delivery with setup.
Free local delivery on orders over $200